Announcements
The department of Mechanical Engineering is functioning since the inception of the college in the year 2019 with an intake of 18 students each academic year. Department consists of highly dedicated, well qualified and competent faculty members active in teaching, research and building quality profile of students. Most of the faculty members are from reputed academic institutions with research and industry backgrounds contributing to implementation of industry-oriented education to students.
The department has laboratories as per university norms for hands-on training and is also into research in the vistas of Mechanical Engineering showcasing the ability through quality publications jointly with the students & research scholars. All the labs are developed taking into consideration the needs of academia and industry. The department has a recognized R&D center by VTU, Belagavi.
Dr. C B Mohan
HOD & Vice Principal
Professor
Email : hod.me@jyothyit.ac.in
Dr. C B Mohan
HOD & Vice Principal
Professor
Email : hod.me@jyothyit.ac.in
Show moreDr. C B Mohan
HOD & Vice Principal
Professor
Email : hod.me@jyothyit.ac.in
Degrees Awarded: Doctorate National Aerospace Laboratories-VTU Ph.D – Lubricant Tribology Masters MSRIT- VTU M.Tech-Manufacturing Science &Engg. Graduation UVCE, Bangalore University B.E- Mechanical Engineering Research, Professional and Scientific Activity: Membership of Professional Bodies: Fellow, Institution of Engineers Fellow, Indian Institute Production Engineers Life Member, Indian Society of Technical Education Life Member, Tribology Society of India Publications: 1. C. B. Mohan et.al, Influence of oil groove shapes on frictional properties of sliding surfaces, Journal of Scientific & Industrial Research, 2018, (Accepted). 2. C.B.Mohan et.al Experimental studies on vataharanaloha – an Ancient Aircraft Material, Journal of Scientific & Industrial Research, 2018, (Accepted). 3. C. B. Mohan et.al, Studies on an Ancient Aircraft Material-Panchloha, Journal of Scientific & Industrial Research, 2017, 76,446-449. IF: 0.557. 4. C.B.Mohan et.al, Development of Novel additives for slide way lubricants, Industrial Lubrication & Tribology, Vol.67, Issue.2, 2015 5. C.B.Mohan et.al Effect of heating of test pin above ambient temperatures on tribological behavior of two-phase and three-phase polystyrene composites, Journal of Thermoplastic Composite Materials, Vol. 28(11) 1482–95, 2013 6. C.B.Mohan et.al, Tribological Studies on Effect of Mixture of Fillers in Polystyrene Matrix Composites, Journal of Thermoplastic Composite Materials, vol.27,1192-1208, 2013 7. C.B.Mohan et.al, Bulk Temperature Estimation of a Polymer Composite Pin, Wear, V 268, pp 346-351, 2010 8. C.B.Mohan et.al, Tribological Studies of Polymer Based Ceramic Metal Composites Processed at Room Temperature”, Wear, V266, pp 878-883, 2009 9. C.B.Mohan et.al, Design and Development of Advanced Linear Reciprocating Tribometer, Wear, V267, pp 1111-1116, 2009 10. C.B.Mohan et.al ,Coolant Lubricity and Coolant Lube Compatibility with Regard to Slide way Behavior, Journal of the Brazilian Society of Mechanical Sciences and Engineering, V 30, No 4, pp 281-285, 2008 International /National Conferences: 1. C.B.Mohan et.al, Studies on Wear Behavior of Aluminum and Copper Particulate Filled Polymer Composites, International Conference on Advanced Composites at IISc, 2011 2. C.B.Mohan et.al, Studies on Wear Behavior of Particulate Filled Polymer Composites, World Tribology Congress, Sept 6-11, Kyoto, Japan 2009 3. C.B.Mohan et.al, International Conference on Industrial tribology (ICIT), Some Studies on Coolant Deterioration-IISc, 2006 Patents (Filed) 1. Composite paste to buildup surfaces and the process of making paste No:4903/CHE/2012 Dated: 26th Nov 2012 Abstract: The novelty in the proposed patent has development of a polymeric paste to rebuild and revitalise worn out surfaces of machine tool slide ways. The embodiments include use of the same paste to fill cracks in metal structures. 2. Development of additive based lubricants for sliding surfaces Regn.No: HQ/IPR/FA/12059/2012, 4th Jan 2013 Abstract: The novelty includes development of an additive based lubricant to improve lubrication under high load.
Dr. G C Vijay Kumar
Professor
Email : vijay.kumar@jyothyit.ac.in
Dr. G C Vijay Kumar
Professor
Email : vijay.kumar@jyothyit.ac.in
Show moreDr. G C Vijay Kumar
Professor
Email : vijay.kumar@jyothyit.ac.in
Dr. G C Vijayakumar, Professor at CIIRC, holds Ph.D in mechanical engineering from VTU together with an MBA in financial management from Southeastern University, USA. He has a combined experience of 32 years in academia, research, and industry in India and abroad. His experience spans academics/training management and administration, undergraduate (B.Tech) and graduate (MBA) teaching, training need analysis, life skills and behavioral skills training, content design/ development and delivery, faculty/trainer recruitment/selection and appraisal, vendor management, feedback design and implementation, faculty/management development programs, and strategic learning initiatives. While in the industry, he has held senior positions such as Vice President and Head – Training in an US$2billion, SEI CMM Level 5 organization in Muscat, Sultanate of Oman; Vice President – Projects and Processes and Vice President – Strategy and Programs in an organization within the international education and training space; Country Head – Training in an engineering design software distribution and implementation company; and, Training Manager in VIT University. He has a great flair for both teaching/training and active research; students receive him very well. His teaching interests include Fluid Mechanics, Hydraulic Machinery, Design of Machine elements, Strength of Materials, Turbo Machines, Applied Thermodynamics, I C Engines, Financial management, and other management courses. His primary areas of research include analysis and prediction of business failure, general management, tribology, and thermal engineering.
Dr. Raghavendra K
Associate Professor
Email : raghavendra.k@jyothyit.ac.in
Dr. Raghavendra K
Associate Professor
Email : raghavendra.k@jyothyit.ac.in
Show moreDr. Raghavendra K
Associate Professor
Email : raghavendra.k@jyothyit.ac.in
Raghavendra Krishna a GATE scholar holds a Ph.D in Additive Manufacturing with Master’s in Manufacturing Technology from NITK, Surathkal and researches in the domain of Additive Manufacturing. His work on laser based 3D printing is published in various journals and presented in conferences. He has a varied breadth of experience working on various aspects of Rapid Prototyping, Laser Technology and works as an Associate Professor. He is a promoter of Make in India and Made in India concepts especially pertaining to products related to Khadi and also works with Indian naturopathy medicine practitioners as a CSR activity.
Dr. Raghavendra J V
Assistant Professor
Email : raghavendra.jv@jyothy.ac.in
Dr. Raghavendra J V
Assistant Professor
Email : raghavendra.jv@jyothy.ac.in
Show moreDr. Raghavendra J V
Assistant Professor
Email : raghavendra.jv@jyothy.ac.in
Raghavendra J V obtained his Bachelor’s degree in Automobile Engineering from VTU, Masters in Machine Design from VTU and has 12 years of teaching experience at undergraduate level and 1 year of inclusive teaching experience at post graduate level of engineering and 1 year of Industrial experience. He has guided more than 12 projects at undergraduate engineering level. He has numerous research papers to his credit in national, International conferences and peer reviewed journals and has participated in several workshops. His areas of interests include Modal Analysis and Vibrations, FEM, Fracture Mechanics, Experimental stress analysis, Dynamics of machines. He has the honours of life member of ISTE and is an Assistant Professor.
Telephone : For Admissions-> 90711 17475 General Enquiry-> 95354 23635Email: info@jyothyit.ac.in, principal@jyothyit.ac.in