Author Archives: jyothyblogger - Page 2

IoT Workshop @ Bagmane tech park

Author : Manjari M N, 6th sem ISE                                                                      Date: 9 & 10-04-2016

We had a two day workshop on internet of things (IoT) . We were almost an hour late to the class on the first day, since we ended up in Phase 2 of Bagmane tech park; But we were supposed to go to Phase 1. We finally made it to the texas instruments campus. It was an amusing view through the way to the class. Since we were late, we missed most of the theoretical part of the workshop. However that was not much of a loss, because Arvind Sir (trainer) guided us through the experiments we performed.

We started off with a simple experiment to blink an LED, after which we got a break. We resumed with other experiments right after the much needed break.

re_iot1

We used Launchpad (by Texas instruments) for all the experiments and the programming language we used was “Wiring”, which is a mixture of C and C++. Energia is the editor we used for coding.

There were approximately 18 members in the class of which a few were students, a few were employees. We all were divided into teams of two members, of which Mayuri and I were a team. Every team in the class were provided with an experiment kit, using which we all did the experiments.

Arvind sir mentioned the application of each of the experiment we did. Everyone of us got an idea of exactly why we were doing that particular experiment. Arvind sir was very elaborate with whatever he explained. He guided everyone of us throughout the workshop and cleared each of our doubts.

We had a lunch break after a few experiments. Lunch was available in the canteen. We all had good food for lunch. We resumed right after lunch and continued with similar experiments till 6 in the evening.

iot2

The next morning we reached at the right time. We performed many more experiments, which were quite interesting. We had a faculty from T John college as a volunteer, who helped us on this day.

By the end of the day, each group was given a different kit to perform vivid experiments and each of the teams were asked to give a demo. Our group – Pallavi, Yashaswini, Mayuri and I got a Node4j board, which was more of a mini-project, but, we were not successful since we lacked a software. We carefully observed the demos which was presented by each of the other teams, of which one team was of my classmates – Srivatsa, Shritha and Vinay Raaj. All the other groups gave the demonstration of the experiments they were asked to.

At the end of second day, we got a picture with arvind sir and left the campus

A Day @ Intel Expo 2016

Author: Adithya B, Asst. Prof. Dept of CSE                                                              Date: 11/04/2016

Live demo has always been a enthusiastic display of technology in our college. This time around we were fortunate to get a chance to visit Intel Expo for the demonstration of technology in Intel. The Intel Edison Spider BOT,  Hand gesture  based king Julian game, smart interconnected watches, flight simulator, virtual reality and augmented photos were a treat to tech minds and fun for kids who had accompanied their parents in Intel.

The 3D printing technology which not just printed models but essentially scanned the models using HP Sprout computer was mind blowing. We throughly enjoyed and got some very good ideas as takeaway for our live demo at our college

Group Photos with our Students During ETET

FDP on Advanced Technologies and Modern Trends in Civil Engineering Constructions

Author: Poornima C, Asst. Prof., Dept of Civil                                                  Date: 11/01/2016

Objective: To acquaint the faculty members with the state of the art technologies in the civil engineering industry and provide an opportunity for the faculty and research scholars to enhance there knowledge with the peers.

Key features of the FDP:

  • Modern construction methodologies and project management

  • A technical visit to construction material testing laboratory [Civil Aid Technoclinic Pvt Ltd.]

  • A site visit to a major construction project near Bengaluru. (Prestige Golfshire, Nandi Hills Road)

  • Concept of Chemical Admixture and recent trends in concrete Technology

  • Temple Architecture and site visit to Swananda Ashrama
  • Demonstration on softwares – E-survey, CADD & Rivet.

  • Emerging trends in transportation engineering.

CYPECAD Software Training Programme

Author: Mr. Nishchay Viswasena, Asst. Prof., Dept of Civil                                 Date: 23/12/2014

Objective: To encourage the faculty members to learn the latest design software and encourage the students to learn the same.

CYPECAD is the software used for reinforced concrete and steel structures which provides the spatial analysis, structural element design, reinforcement and section edition and construction drawings of the structures. It carries out the analysis of three dimensional structures composed of supports and floor slabs, including their foundations and the automatic design of reinforced concrete and steel elements. With CYPECAD, the engineer holds a precise and efficient tool to resolve all the aspects related to the analysis of the structures of any type of concrete as well as being adapted to the latest international codes.

National Design Competition – CADD Centre

Author: Mr. S Kumar, Asst. Prof., Dept of Civil                                                 Date: 22/02/2016

Objective: To encourage the students to use AutoCAD software for 2D and 3D Modelling.

Design and modeling competition was organized by CADD centre in association with JIT. The students participated in the competition to model and design the building. The shortlisted candidates were selected for next level competition conducted by regional level. Out of 500 participants from different engineering colleges, our student Mr. Prajwal G. V. of 6th semester got selected for regional level.

Bridge Design and Bridge Modelling

Author: Shambhavi R S, Asst. Prof., Dept of Civil                                                   Date: 25 & 26/03/2015

Objective: To acquaint the students with the bridge design principles and designing the bridge using software.

Civil Bridge Champ 2015 – A Two Day Workshop organized by GADgets’ in association with JIT. The students were trained to design bridges using software and also fabricate the bridge prototype models to test the maximum load carrying capacity for the designed values.

Visit to Water Treatment Plant at Thoraikadanahalli

Author: Nishchay Viswasena, Asst. Prof., Dept of Civil                                                   Date: 09/03/2015

Objective: To enrich the knowledge of the students about the various stages of water treatment that the Cauvery river water undergoes before it is supplied to the Bangalore cities.

The automated water treatment plant is being run by Degremont Limited. The Kaveri water reaches the plant from Shimsha. The plant has a maximum capacity of treating 750 million litres of water per day (MLD).

The visit envisaged the students about whole procedure and understands the process in a better way. They also observed the automated treatment process which would increase the efficiency of the treatment and the various measures adopted to adhere to the quality and the safety specifications.

Industrial Visit to Bearys Global Research Triangle

Author: S Kumar, Asst. Prof., Dept of Civil                                                                     Date: 09/03/2015

Objective: To enrich the knowledge of the students about the various stages of water treatment that the Cauvery river water undergoes before it is supplied to the Bangalore cities.

The automated water treatment plant is being run by Degremont Limited. The Kaveri water reaches the plant from Shimsha. The plant has a maximum capacity of treating 750 million litres of water per day (MLD).

The visit envisaged the students about whole procedure and understands the process in a better way. They also observed the automated treatment process which would increase the efficiency of the treatment and the various measures adopted to adhere to the quality and the safety specifications.

Visit to Gorur Dam

Author: Shambhavi R S, Asst. Prof., Dept of Civil                                                   Date: 23/07/2014

Objective: To educate the students about the salient features of dams and the concept of hydropower generation.

Gorur Dam is constructed across the river Hemavathy, an important tributary of the river Kaveri. The dam is located in Gorur, near the city of Hassan in Karnataka. Built in 1979, the reservoir has been serving multiple purposes of providing water supply for drinking, irrigation to the agricultural lands and production of electricity. The reservoir has a catchment area of 2810sq km. With a length of 4692 meters and a height of 58.5 meters the reservoir has gross storage capacity of 1050.63 mcm. The reservoir has 6 large radial spillway gates.

and